Gas Safety Week 2026 – How Gas Safe Are You?

Gas Safety Week returns from 14th–20th September 2026, bringing the industry together once again to raise awareness of gas safety and the simple steps that can help protect people, properties and businesses.

At DMS Metering Solutions, gas metering and control has been a core part of what we do for over 25 years. From diaphragm, rotary and turbine gas meters to regulators, safety shut-off valves, smart metering technology and accessories, we support contractors, consultants and building operators with complete gas metering solutions.

But how gas safe are you?

Gas Safety Quiz 2026 – Test Your Knowledge!

Question 1

Where can you check what type of gas work an engineer is qualified to carry out?

a) Their company van
b) The back of their Gas Safe ID card
c) Their invoice
d) Their website

Answer: b) The back of their Gas Safe ID card

Gas Safe registered engineers carry an ID card showing their licence details. The categories on the back confirm the types of gas work they are qualified to undertake.

Question 2

Which of these could be a warning sign that a gas appliance isn't working correctly?

a) Lazy yellow or orange flames
b) Black or sooty marks around the appliance
c) Increased condensation
d) All of the above

Answer: d) All of the above

These can all be warning signs of an unsafe or poorly operating gas appliance and should not be ignored.

Question 3

Does having a carbon monoxide alarm mean you don't need your gas appliances checked?

a) Yes
b) No

Answer: b) No

A working CO alarm is an important additional safety measure, but it doesn't replace regular servicing and safety checks carried out by a Gas Safe registered engineer.

Question 4

Why is it important not to block ventilation around gas appliances?

a) It makes the room colder
b) Gas appliances need adequate ventilation to operate safely
c) It affects the gas meter reading
d) It doesn't matter

Answer: b) Gas appliances need adequate ventilation to operate safely

Gas appliances rely on correct ventilation, so vents should never be blocked simply to prevent draughts.

Question 5

You smell gas. What should you do?

a) Turn the lights on to investigate
b) Try to repair the problem yourself
c) Ventilate if safe, leave the area and contact the Gas Emergency Service
d) Wait to see if the smell disappears

Answer: c)

If you smell gas, avoid operating electrical switches or anything that could create a spark. Leave the affected area and call the 24-hour National Gas Emergency Helpline on 0800 111 999 from a safe location.

Gas Safety FAQs

Who is legally allowed to work on gas appliances?

Gas work should be carried out by a suitably qualified Gas Safe registered engineer. Always check their Gas Safe ID card and make sure they are qualified for the particular type of work required.

How often should gas appliances be checked?

Gas Safe Register recommends having gas appliances safety checked every year by a qualified Gas Safe registered engineer. Regular maintenance can also help identify developing faults before they become more serious.

What are the warning signs of an unsafe gas appliance?

Look out for signs such as:

• Lazy yellow or orange flames instead of crisp blue flames

• Black or sooty marks around the appliance

• Excessive condensation

• Pilot lights that repeatedly go out

• An appliance behaving differently or performing poorly

If you're concerned, stop using the appliance and contact a Gas Safe registered engineer.

Can I install or alter gas equipment myself?

Gas installations should not be treated as a DIY job. Work involving gas appliances and installations must be carried out by appropriately qualified professionals.

What should I do if I suspect a gas leak?

Don't try to find or repair the leak yourself. Avoid naked flames and electrical switches, ventilate the area where it is safe to do so, leave the property or affected area and contact the Gas Emergency Service.

For natural gas emergencies in Great Britain, call 0800 111 999.

DMS Gas Product Spotlight – Our Top 3

Gas safety isn't only about responding when something goes wrong. Correctly specified metering, pressure regulation, monitoring and control equipment all form part of a well-designed gas installation.

Here are three DMS favourites.

1. Honeywell BK-G Diaphragm Gas Meters

A familiar name across the gas industry, the Honeywell BK-G range offers dependable gas measurement across domestic, commercial and industrial applications.

The DMS range extends from smaller BK-G meters through to the high-capacity BK-G100, with models suitable for natural gas and LPG applications. The meters are MID approved and communication options include pulse and M-Bus, depending on specification.

Why we like it:

• Proven diaphragm gas-meter technology

• Wide range of sizes

• MID approved

• Accurate measurement at low flow rates

• Remote-reading options available

• Suitable for a huge variety of applications

A dependable all-rounder and one of the most recognisable gas meter ranges we supply.

2. Honeywell EI7 Electronic Index

Taking the trusted BK-Series into the smart-metering era, the Honeywell EI7 Electronic Index provides remote communication, data logging and additional smart functionality for compatible BK-Series diaphragm gas meters.

It is designed for BK-G10, BK-G16 and BK-G25 commercial meters and BK-G40, BK-G65 and BK-G100 industrial meters. Depending on configuration, functionality includes NB-IoT and GSM/GPRS communication, electronic temperature compensation, data logging and tamper detection.

Why we're excited about it:

• Remote meter reading

• Integrated data logging

• Smart communication

• Temperature compensation

• Reduced requirement for manual meter-reading visits

• Adds modern connectivity to the established BK platform

A great option where traditional gas measurement needs to meet modern data collection.

3. Honeywell J48 Low Pressure Gas Regulator

Not technically a meter — but deserving of a place in our top three gas products.

The Honeywell J48 is one of the best-known low-pressure gas regulators in the industry and is available from DMS in sizes from 20mm to 150mm.

Designed to control downstream gas pressure, the range offers features including Full Positive Lock Up, horizontal or vertical installation and screwed or flanged connection options depending on size.

Why it's a DMS favourite:

• Well-established industry product

• 20mm–150mm range

• Full Positive Lock Up

• Horizontal or vertical mounting

• Screwed and flanged options

• Straightforward pressure adjustment

Reliable pressure control is every bit as important as accurate measurement — which is why the J48 continues to be such an important part of our gas range.

More Than Just Gas Meters

As a Honeywell Diamond Partner, DMS Metering Solutions offers extensive experience across Honeywell’s gas metering and control portfolio, backed by specialist product knowledge and technical support. We can support complete gas metering and control requirements, including:

• Diaphragm gas meters

• Rotary gas meters

• Turbine gas meters

• Smart gas metering

• Gas pressure regulators

• OPSO valves

• Gas solenoid valves

• Gas detection and control equipment

• Pulse outputs and data collection

• Meter installation kits and accessories

  
  

Whether you're replacing an existing meter, designing a new plant room or looking to bring gas consumption into a wider monitoring system, our team can help with product selection and specification.

Stay Safe. Stay Gas Safe.

Gas Safety Week is a useful reminder, but gas safety matters every week of the year.

Always use suitably qualified professionals when working with gas systems and never ignore signs that an appliance or installation may not be operating correctly.

Need help selecting a gas meter, regulator or monitoring solution?

Speak to the DMS team on 01773 534555 or explore our complete gas metering and control range.