The Kamstrup MULTICAL 801 is an energy meter suited to industrial and commercial applications where the meter is exposed to extreme environmental conditions. The following text is taken from the Kamstrup press release.

Under the headline “Don’t let poor equipment get you down” Kamstrup launches the MULTICAL^® 801, an energy meter of its own class. Power supply back-up, valve control and IP67-sealing ensure precise metering of heat and cooling consumption even in dusty and moist environments.

In the commercial & industry segment metering equipment is often exposed to rough influences. MULTICAL^® 801 is a meter designed for delivering precise data even under extreme conditions.

Due to its IP67 sealing MULTICAL^® 801 is robust and capable of functioning even in dusty and moist environments. Furthermore the backlit display is readable regardless of the light conditions.

MULTICAL^® 801 is compatible with temperature sensors like Pt100 and Pt500 versions with a 2- or 4-wire connection. The capacity ranges from 0,6 to 30.000m3/h in a temperature span from 2^o C-180^o C.

MULTICAL^® 801 is based on proven technology, but a number of extra features have been added in order to meet the most demanding applications.

Back-up function

In case of power outage an internal battery maintains all basic metering functions.

Valve controller
A built-in valve controller automatically limits effect, maximum flow and temperature difference once the flow rate has been set.

Leakage control
MULTICAL^® 801 equipped with flow meters in both flow and return pipes generates leakage control and submersion surveillance on heating systems as well as cold water pipes. As another feature, impulses from connected water meters reveal leakages in the tap water system.
The intelligent warning system reduces repair costs and prevents spilling of water.
Several communication channels
MULTICAL^® 801 provides four analogue pulse outputs for remote reading via radio, GSM/GPRS, M-Bus, LonWorks or one of Kamstrup’s network solutions. MULTICAL^® 801 manages up to four communication channels.

Data loggers
All consumption data are stored for 460 days, 36 months and 15 years. MULTICAL^® 801 contains a data logging module with a programmable logging interval. This enables an accurate analysis of the energy consumption and a means for trouble shooting.

Of the highest standard
MULTICAL^® 801 is certified for the EN 1434-4:2007, the environmental class C and tested and approved according to the MID, the M1, E1, and E2. In the industrial class E2 the meter is certified for 100m cables for temperature sensors and flow meter.

Kamstrup is a world leading manufacturer of energy meters. Our energy meters are based on advanced ultrasonic measuring. Since 1991 the ultrasonic technology has been improved and refined at Kamstrup, and it has proven extremely reliable and accurate.

Available from May 2010 the Kamstrup MULTICAL 402 is the successor of MULTICAL 401 – a well-known energy meter, which for long has been among the most popular meters on the market for residential and commercial applications. The following text is taken from the Kamstrup press release.

MULTICAL 402 is designed for maximum functionality and usability. On the large readable display both actual consumption, accumulated consumption and target date consumption can be shown. Extra pulse outputs for energy and volume enable easy integration into different forms of building management systems.

No battery change
MULTICAL 402 is easy to install and wear-free. The flow meter is based on ultrasonic technology with no moving parts and due to new technology and fine-tuned operation the battery supply will keep the meter running for 16 years.
A low total cost of ownership combined with accurate measurement throughout the long service life makes MULTICAL 402 a good investment.

Wireless meter reading
The new energy meter also carries extended functionality in respect to reading. Besides wired M-Bus the meter is read via wireless M-Bus – a one-way radio communication with open protocol. For this purpose Kamstrup supplies a so-called Wireless M-Bus Reader, a hand-held reading unit, which automatically collects meter data, when in physical proximity of a MULTICAL 402 meter.

Besides Wireless M-Bus Reader, MULTICAL 402 can be read wirelessly with hand-held units like USB Meter Reader and MULTITERM Pro. Furthermore MULTICAL 402 can easily be integrated into advanced radio based meter reading systems, in which data are automatically transferred to the central Meter Data Management System back at the utility.

Low environmental impact
MULTICAL 402 is the first product from Kamstrup with a Carbon Footprint report. Carbon Footprint is a term that covers the total emission caused by a product throughout its entire service life. The environmental impact of the meter, from cradle to grave, has been mapped and also with it comes to emission MULTICAL 402 is focused on low-energy.

DMS Flow Measurement and Controls Limited is proud to announce the 10th anniversary of the company in April of 2010.

The company started life as Direct Metering Supplies Limited but decided to rename itself during 2004 recognising that nearly all their clients had adopted the abbreviation ‘DMS.’

Over 10 years DMS have established themselves as a major supplier of Water Meters, Heat and Cooling Meters, Gas Meters, Electricity Meters and Oil Meters. They hold comprehensive stocks at their premises in Eastwood, Nottinghamshire and can despatch most orders the same day.

They have established excellent relationships with their European suppliers and are proud to represent such major names in the industry such as Sontex, Kamstrup, GWF, Apator PoWogaz, Wateau, Elster, Samgas and Tecnocontrol.

They also have a web commerce site www.dmsltd.com where a large range of products are available to order over the internet linked with an e-bay shop makes internet shopping a easy option.

DMS look forward to the next 10 years serving thier ever growing customer base.

The Sontex Supercal 531 Smart Integrator and the Superstatic 440 ’static’ flow meter with no moving parts is your answer to systems containing glycol. The Supercal 531 can be programmed for the type of glycol and the concentration percentage to give you accurate readings where some heat meters will not operate at all.

With the range of outputs available the Supercal/Superstatic combination can be tailored for your needs for either heating or cooling applications at competitive prices.

Please call 01773 534555 to discuss your application

Sontex Superstatic 440 / Supercal 531 - Please Click Here

• Supercal 531 Smart Integrator 240v or Battery Powered
• Various Output Options Including ‘Volt Free’ Pulse Output
• M-bus, Bi-Directional Radio, Analogue, LON (Gateway)
• 60+ Glycol Programmes (more added monthly)
• Temperature Range -20C to 200C
• SuperStatic 440 Meter – with no moving parts
• -20C to 130C Rated (Flanged Versions)
• Sizes DN15 to DN250
• Fully EN1431 & MID Approved

**PLEASE CALL 01773 534555 TO DISCUSS YOUR APPLICATION**

Not a Problem now!!

Sontex Superstatic 440 & Supercal 531

Supercal 531 Smart Integrator 240v or Battery Powered

 **PLEASE CALL 01773 534555 TO DISCUSS YOUR APPLICATION**