The following Heat Meters supplied by DMS, comply to these requirements.

The Sontex Superstatic 440 is a ’static’ meter with no moving parts
using the fluid oscillation principle

Supercal 531 Power Options: 240Vac, 24Vac, 24VDC, Lithium Battery

Approvals: EN1434 Class 2 & MID RHI Compliant

Sizes Available: 1/2″ (qp1.00) to DN500 (qp1500)

Suitable for: Heating & Cooling with Glycol content

Communication Modules: Pulse (volt free,) M-bus, RS232, Analogue, Radio

The Sontex Superstatic 449 is a ’static’ Compact Meter with no moving parts
using the fluid oscillation principle

Supercal 531 Power Options: 240Vac, 24Vac, 24VDC, Lithium Battery

Approvals: EN1434 Class 2 & MID RHI Compliant

Sizes Available: 1/2″ (qp1.0) to 3/4″ (qp2.5)

Suitable for: Heating & Cooling with Glycol content (released 2012)

The Superstatic fluid oscillator measuring principle, used with the heat meters from Sontex, guarantees a high measuring accuracy and measuring durability. This fact was proved with top marks during the last heat meter tests of the German District Heating Association.

Now Sontex presents as a world innovation the small fluid oscillator heat meter Superstatic 449, an innovation with all known advantages of a Superstatic heat meter. The Superstatic 449 is a compact heat meter with MID homologation according to EN 1434 class 2 that perfectly complements the existing mechanical compact heat meter Supercal 539 (qp 0,6 – 2,5) and the static heat meter Superstatic 440 (qp 1 – 1500) at small flows.

The Superstatic 449 is offered for flows of qp 0,6 – 2,5 and can also be used as a cooling meter thanks to the waterproof design. The small fluid oscillator works without restriction in all mounting positions
horizontal, riser or downward flows. The Superstatic 449 can easily be integrated in existing or new heating or cooling installations thanks to the comprehensive communication and expansion possibilities that the device offers and the complete data package like set day values, monthly values, average values, maximum values of flow, power, temperature and tariff functions. The Superstatic 449 also offers communication modules of M-Bus, Radio, RS-232, GSM and LON.
The Superstatic 449 ’static’ flow meter is EN1434 Class 2 Approved and is therefore compliant to the new Department of Energy & Climate Change RHI (Renewable Heat Incentive) scheme.
Please call 01773 534555 to discuss your application

• Superstatic 449 240v 24Vav,12-24Vdc or Battery Powered
• Various Output Options Including ‘Volt Free’ Pulse Output (mains powered only)
• Modules avaialble: M-bus, Bi-Directional Radio, Analogue, LON (plug & play)
• Cooling Options Available – Glycol Compatible (Programming available q1 2012)
• SuperStatic Meter – with no moving parts
• Sizes DN15 & DN20 90C Rated
• Fully EN1434 Class 2 & MID Approved
• Department of Energy & Climate Change RHI (Renewable Heat Incentive) scheme compliant
**PLEASE CALL 01773 534555 TO DISCUSS YOUR APPLICATION**

The Sontex Supercal 531 Smart Integrator and the Superstatic 440 ’static’ flow meter with no moving parts is your answer to systems containing glycol. The Supercal 531 can be programmed for the type of glycol and the concentration percentage to give you accurate readings where some heat meters will not operate at all.

Sontex flow measurement metering systems

With a range of outputs available the Supercal/Superstatic combination can be tailored for your needs for either heating or cooling applications at competitive prices.

• Supercal 531 Smart Integrator 240v or Battery Powered
• Various Output Options Including ‘Volt Free’ Pulse Output
• M-bus, Bi-Directional Radio, Analogue, LON (Gateway)
• 60+ Glycol Programmes (more added monthly)
• Temperature Range -20C to 200C
• SuperStatic 440 Meter – with no moving parts
• -20C to 130C Rated (Flanged Versions)
• Sizes DN15 to DN500

Fully EN1431 & MID Approved

DMS Flow Measurement and Controls Limited is proud to announce the 10th anniversary of the company in April of 2010.

The company started life as Direct Metering Supplies Limited but decided to rename itself during 2004 recognising that nearly all their clients had adopted the abbreviation ‘DMS.’

Over 10 years DMS have established themselves as a major supplier of Water Meters, Heat and Cooling Meters, Gas Meters, Electricity Meters and Oil Meters. They hold comprehensive stocks at their premises in Eastwood, Nottinghamshire and can despatch most orders the same day.

They have established excellent relationships with their European suppliers and are proud to represent such major names in the industry such as Sontex, Kamstrup, GWF, Apator PoWogaz, Wateau, Elster, Samgas and Tecnocontrol.

They also have a web commerce site www.dmsltd.com where a large range of products are available to order over the internet linked with an e-bay shop makes internet shopping a easy option.

DMS look forward to the next 10 years serving thier ever growing customer base.

The Sontex Supercal 531 Smart Integrator and the Superstatic 440 ’static’ flow meter with no moving parts is your answer to systems containing glycol. The Supercal 531 can be programmed for the type of glycol and the concentration percentage to give you accurate readings where some heat meters will not operate at all.

With the range of outputs available the Supercal/Superstatic combination can be tailored for your needs for either heating or cooling applications at competitive prices.

Please call 01773 534555 to discuss your application

Sontex Superstatic 440 / Supercal 531 - Please Click Here

• Supercal 531 Smart Integrator 240v or Battery Powered
• Various Output Options Including ‘Volt Free’ Pulse Output
• M-bus, Bi-Directional Radio, Analogue, LON (Gateway)
• 60+ Glycol Programmes (more added monthly)
• Temperature Range -20C to 200C
• SuperStatic 440 Meter – with no moving parts
• -20C to 130C Rated (Flanged Versions)
• Sizes DN15 to DN250
• Fully EN1431 & MID Approved

**PLEASE CALL 01773 534555 TO DISCUSS YOUR APPLICATION**

Not a Problem now!!

Sontex Superstatic 440 & Supercal 531

Supercal 531 Smart Integrator 240v or Battery Powered

 **PLEASE CALL 01773 534555 TO DISCUSS YOUR APPLICATION**