DMS stock many manufacturers of Diaphragm Gas Meters, Turbine Gas Meters and Roots Rotary Positive Displacement Meters. Our wide ranges of Gas Meters are suitable for most Domestic and Industrial/Commercial purposes.
Samgas & Elster range of Diaphragm Gas Meters G2.5 to G100 offer a very wide measuring range designed for working upto 0.5 bar. All models are available with the option of Low Frequency pulse outputs for use with Energy Monitoring Systems. The principal elements of the meter are a pressed steel casing internally and externally coated against corrosion. A measuring module which is inserted into the casing a complete unit and a magnetic coupling transmitting the movement to the index.
For ‘Smart Metering’ applications Elster Diaphragm Gas Meters are also available with an m-bus interface by using the BK Z6-1 Absolute Encoder index.
QA & QAe Turbine Gas Meters
QA Quantometers are highly reliable gas meters which can be used throughout the entire field of flow metering and which fulfil all of the varying requirements of industrial metering.
The QA and QAe quantometers work on the principle of the rotating turbine wheel. The rotation of the turbine wheel is proportional to the volume of the flowing gas and this volume (Vb/m3 ) is registered by either a mechanical (QA) or an electronic (QAe) index. The QA & QAe turbine gas meters are available in sizes DN 25 (1″) to DN 150
For ‘Smart Metering’ applications the QAe Gas Meters with electronic indexes are also available which have an EN1434 m-bus interface as standard.
The Q/Q75 series of quantometers are well known in the field of industry and commerce as robust and accurate turbine meters. They have a low price and are particularly suitable for highly-accurate and reliable metering, also in higher flow and pressure ranges.
The Q75 is available in sizes DN 50 to DN 600
The ROOTS© meter is designed to accurately measure the total volume of dry gasses and gas mixtures. The time tested and accepted ROOTS© meter with its permanent accuracy employs the rotary positive displacement principle. This built-in accuracy is fixed by precision machined impellers and a rigid measuring chamber. Measurement is not affected by changes in gas specific gravity of pressure nor by wide fluctuating flows. The ROOTS© meter is available in sizes DN 50 to DN 200
The CPT Quantometer is a turbine gas flow meter based on the rotation of an impellor, the speed of rotation being proportional to the flow rate of the gas. A magnetic linkage transfers this movement to the mechanical index, which provides an accurate reading of totalized gas flow and a scaled pulse output for remote reading etc. The meters are constructed for installation between flanges like a “sandwich”. The index head can be rotated through 350 degrees. The CPT turbine gas meter is available in sizes DN 50 to DN 200