The Termix hot water system provides abundant hot water efficiently and reliably while occupying minimal space
The Termix BV unit is ready to install. equipped with a high efficiency hot water heat exchanger and Danfoss thermostatic control or electronic motorised control as required. The water circulation pump is standard equipment. but it can be deleted if an existing circulation pump is to be used. BV-units with thermostatic control must always be installed with circulating hot water.
Bigger systems with thermostatic control have cascade regulation. Optimal control is achieved by setting the smaller valve to a slightly higher value than the other valve so that the smaller valve opens when small quantities of hot water are drawn off. Where big quantities are required quickly. the unit can be supplied with provision for a tank charging circuit.
The Termix BV-unit is particularly suitable for apartment blocks. sports halls. schools etc. where large quantities of hot water are required with optimal operating economy. The small quantities of water in the hot water heat exchanger and the frequent turnover of water prevent the build-up of bacteria.